We all know that a construction site is a dangerous place, and you must wear a safety helmet when entering and leaving. There are also high-voltage lines at high places, sharp objects such as nails, etc. on the ground, and there may be accumulated water and dangerous corrosive chemicals. Of course, there may also be collapses or heavy objects falling. This requires a pair of work boots to protect us. The so-called athletic is a general term for safety shoes and protective shoes, which have the function of protecting the feet and legs from foreseeable injuries. Next, the parts and classification of work boots.
Here is the content list:
l The two main components of work boots are the help surface and the outsole.
l The classification and function of work boots.
The two main components of work boots are the help surface and the outsole.
Work boots are high-tech and high-value-added footwear, and have high requirements for raw materials, accessories, chemicals, machinery, and equipment in the production process. Work boots soles are generally made of polyurethane material by one-time injection molding, which has the advantages of acid and alkali resistance, waterproof, oil resistance, insulation, wear resistance, lightness, etc., and is 3 times more wear-resistant than ordinary rubber soles. Good softness and lightweight, the weight is only 50%-60% of the rubber sole. The two main parts of comfortable are the upper surface and the outsole. To combine the upper surface and the sole into a shoe, they must be treated with glue, and then combined with PU infusion, cold bonding, and stitching. Therefore, the main reason for the opening of the glue is related to the selection of raw materials, the use of glue, the production process, and other factors. After the shoes are purchased and worn for some time, due to the constant twists and turns, it is easy to have a small area of glue opening, and the work boots also have the same phenomenon. How to avoid large-scale opening of work boots and prolong the service life of work boots is analyzed from the production process of work boots and the use of consumers.
First, the safety performance of the inner Baotou to protect the toe work boots is AN1 level, which is suitable for loading and unloading, mining, petroleum, quarrying, metallurgy, ports, machinery, construction, forestry, chemical industries, etc. Second, electrical insulation work boots are suitable for electricians, electronic operators, cable installers, substation installers, etc. Matters needing attention: It is suitable for the working environment where the power frequency voltage is below 1KV, and the working environment should be able to keep the uppers dry. Avoid contact with sharps, high temperature, and corrosive substances, and the sole should not be corroded or damaged. Third, the main function of anti-smashing shoes is to prevent falling objects from smashing the feet. The front toe of the shoes has impact-resistant materials, such as steel plates. Fourth, anti-static breathable are used to prevent accidents caused by static electricity on the human body. Among them, conductive shoes can only be used in places with little risk of electric shock. Insulating impurities and high-insulating socks should not be worn. Fifth, acid and alkali-proof shoes (boots) are used in workplaces where acid and alkali, and other corrosive liquids such as acid and alkali splash on the ground. The bottom and leather of acid-base shoes (boots) must have good acid and alkali resistance and resistance to Penetration properties. Sixth, cold-proof shoes (boots) are used to protect the feet of low-temperature workers from freezing. Cold-proof shoes (boots) are divided into two types: no heat source and heat source type. The former are cotton shoes, fur shoes (boots), etc., and the latter are thermal shoes (boots), which usually use fuel (such as oil, and carbon) as the heat source.
If you are interested in our work boots products, you can contact us, our website is https://www.safetoe.net/, you are welcome, and look forward to cooperating with you. Our company adheres to the corporate culture of "quality first, customer first", and always makes unremitting efforts to become a professional supplier of waterproof in the industry.
