Safety Shoe Selection and Maintenance Strategy

Different from ordinary civilian shoes, safety shoes can have one or more protective functions. If you need to buy safety shoes, make sure you know the needs of your environment and choose the correct size for the best experience.

Here is the content list:

• Teach you how to choose safety shoes according to environmental and safety needs

• How to choose the right size for you and maintenance matters

Teach you how to choose safety shoes according to environmental and safety needs

1. If the working environment is dusty and there is a slight splash of water and oil, it is recommended to use safety shoes with leather uppers;

2. If there is a small amount of dust and slight water splashes in the working environment, you can use safety shoes with water-repellent fabrics on the upper surface;

3. If there is less dust, water, and oil splashing in the working environment, you can use safety shoes with suede uppers;

4. If the ground is dry or there is occasionally a small amount of water and oil, safety shoes with polyurethane outsole can be used;

5. If the soles of safety shoes need to be in contact with water for a long time, or in contact with the high-temperature ground above 120°. It is recommended to use safety shoes or safety boots with rubber outsole;

6. If the requirements of anti-smashing, anti-puncture, and electrical insulation are required at the same time, from a safer point of view, you can choose composite toe safety shoes.

How to choose the right size for you and maintenance matters

Try on safety shoes, and pay attention to the following points

1. There is a certain margin on the front tip of the safety shoes because there is a hard steelhead on the front of the safety shoes. When wearing, pay attention to having enough margin on the toe cap.

2. Different types of safety shoes have different requirements for fat and thinness.

3. The heel of the safety shoe is the same and the heel is not tight or loose.

4. The safety upper cannot squeeze the instep.

5. The waist socket of the safety shoes is in line with the arch of the foot, and the waist must hold the foot.

Good maintenance can prolong the life of your safety shoes

1. Before wearing new safety shoes for the first time, use a protective spray to maintain the leather to strengthen or restore its waterproof function.

2. Before spraying, remove the shoelaces to ensure that all hidden parts and gaps (especially the hidden parts near the tongue) can be sprayed.

3. For particularly dirty shoes, use a brush and a small amount of warm water to remove mud and stains. It is recommended to use a special safety shoe-cleaning lotion. After cleaning, fully spray the protective spray (washing opens the pores on the leather, and the protective spray closes the pores).

4. Please spray the protective spray when the safety shoes are just cleaned or wet and need to be fully dried for 24 hours.

5. Apply leather care lotion on the shoe leather, and use a hair dryer to quickly heat the lotion to penetrate the pores of the leather, thereby restoring the leather to softness.

Our official website is https://www.safetoe.net/. If you want to know more about safety shoes, you can communicate with us on the website. We will be glad to provide you with high-quality safety shoes, good service, and competitive prices to provide more and better service!